All InnoGear products come with a 12-month warranty.
Details
Model Number: MU078
InnoGear Flexible Mic Stand
A pro set for musical instruments & accessories
A fast and professional method to improving the recording capability, whether at home or in the studio, this dependable scissor boom arm design gives you the ability to put your microphone exactly where you need it. Featuring an all-steel construction, this two-section studio boom arm can be folded for convenient storage and transportation. A handy quick desk clamp can attach to surface edges of varying thickness and secures in seconds by tightening the clamp.
Two metal springs in each arm allow for quiet, smooth, and flexible 360-degree microphone positioning needed in broadcast studios, voice-over studios, or at your computer desk at home.
Adjustable Angle
The suspension boom scissor arm stand is?fully adjustable in all parts.?The arms of the stand are extensible at 135?? back and forth, and 180?? up and down, enabling you to adjust the suitable angle and height to show your perfect voice.
Strong Loading Capacity
The max load-bearing capacity of the stand is?3.3 lb with the default setting. But the bearing capacity can be?lifted up 4.0 lb if you set the spring to the second hole. The heavy-duty stand will?hold your microphone or webcam tighly without dropping or shaking.
Upgraded Table Clamp
The upgraded table clamp is designed with a side screw that can have the microphone stand been?firmed tightly on the desk. The?sponge pad?on the clamp could?protect your table?without any scratches when you swivel it.
For Dynamic Mics
Connect the included mic clip onto the arm and attach your dynamic microphone, no screw adapter needed.
For Blue Yeti Nano
Thread the included 5/8" to 1/4" screw adapter into the microphone first, and then thread the 3/8" to 5/8" adapter.
For Blue Snowball
Only 3/8" to 5/8" screw adapter is needed for connecting to your Blue Snowball mic. Conncet your mic to the stand as per the instruction.
For Condenser Microphone
Connect the included 3/8" to 5/8" adapter onto the arm stand, screw on the shock mount and then inset your condenser microphone in.